PPG IND INC -- 6-510, SPEEDHIDE LATEX S/G WHITE & PASTEL B -- 8010-00N029950 
=====================  Product Identification  =====================

Product ID:6-510, SPEEDHIDE LATEX S/G WHITE & PASTEL B
MSDS Date:04/04/1991
FSC:8010
NIIN:00N029950
=== Responsible Party ===
Company Name:PPG IND INC
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Info Phone Num:800-441-9695;412-492-5555
Emergency Phone Num:304-843-1300
CAGE:OHGX4
=== Contractor Identification ===
Company Name:PPG IND INC
Address:3938 PORETT DR
Box:9
City:GURNEE
State:IL
ZIP:60031
Country:US
Phone:304-843-1300
CAGE:OHGX4
Company Name:PPG INDUSTRIES INC
Address:ONE PPG PLACE
Box:City:PITTSBURGH
State:PA
ZIP:15272
Country:US
Phone:1-800-245-2974 (CAL HYPO)
CAGE:47695

=============  Composition/Information on Ingredients  =============

Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 20-25%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Ingred Name:CLAY (KAOLIN); (ALUMINUM SILICATE)
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 1-2%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST; 9293

Ingred Name:PROPIONIC ACID, 2-METHYL-, MONOESTER WITH
    2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (2,2,4 TRIMETHYL 1,3 PENTANEDIOL
    ISOBUTYRATE)
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 1-2%

Ingred Name:WATER; (DEIONIZED WATER)
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 50-55%

Ingred Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 20-25%

Ingred Name:SUPP DATA: FOR INHAL OF TITANIUM DIOXIDE DUSTS FROM
    COATINGS IS VERY LIMITED. SINCE OVEREXP ARE NOT EXPECTED, (ING 7)
RTECS #:9999999ZZ

Ingred Name:ING 6: THERE IS NO SIGNIFICANT HAZARD FOR MAN.
RTECS #:9999999ZZ

Ingred Name:FIRST AID PROC: EXPOSURE TO CORROSIVE MATERIAL, PERSISTENT
    SKIN/EYE IRRITATION OR BREATHING DIFFICULTIES.
RTECS #:9999999ZZ

Ingred Name:VENT: LOWEST SUGGESTED EXPOS LIMITS, LEL IN FIRE & EXPLO
    BELOW STATED LIMIT, & TO REMOVE DECOMP PRODS DURING (ING 10)
RTECS #:9999999ZZ

Ingred Name:ING 9: WELDING OR FLAME CUTTING ON SURFACES COATED WITH
    THIS PRODUCT.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INGEST: HARMFUL/FATAL IF
    SWALLOWED. EYE: CAUSES EYE IRRIT. SKIN: MAY CAUSE SLIGHT SKIN
    IRRIT. INHAL: VAP & SPRAY MIST MAY BE HARMFUL IF INHALED. VAP GEN
    AT ELEVATED TEMPS IRRIT EYES, NOSE & TH ROAT. (CHRONIC) AVOID LONG
    TERM & RPTD CONT. PROD CNTNS TITANIUM DIOXIDE. ANIMALS INHALING
    MASSIVE QTYS OF (SUPP DATA)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:REDNESS, ITCHING, BURNING SENSATION AND VISUAL
    DISTURBANCES MAY INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING,
    CRACKING, BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED
    WITH EXCESSIVE SKIN  CONTACT.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NOT INDUCE VOMIT. EYE; FLUSH EYES IMMED W/PLENTY
    OF H2O FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF H2O
    FOLLOWED BY WASHING W/SOAP & H2O. INHAL: REMOVE TO FRESH AIR. APPLY
    ARTF RESP  & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF ANY OF
    FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CNTRL CNTR,
    EMER ROOM/PHYS IMMED; HAVE MSDS INFORM AVAIL. INGEST, EXCESSIVE
    (ING 8)

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Lower Limits:0.0%
Extinguishing Media:USE NFPA CLASS B EXTING (CARBON DIOXIDE, DRY
    CHEMICAL OR UNIVERSAL AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
    EQUIP.H2O SPRAY MAY BE INEFT.H2O SPRAY MAY BE USED TO COOL CLSD
    CNTNRS TO PVNT PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
    (DUE TO BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
    W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE
    ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL WITH SAWDUST,
    VERMICULITE, OR OTHER  ABSORB MATL AND PLACE INTO CNTNRS FOR
    DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
    QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
    CLASS IIIB COMBUST LIQS. PROT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF MULTIPLE COMPONENT COATING
    SYSTEM, READ MSDS FOR OTHER COMPONENT OR COMPONENTS BEFORE BLENDING
    AS RESULTING MIXTURE MAY HAVE HAZARDS OF ALL PARTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE NIOSH/MSHA
    APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
    KEEP CONC OF INGREDS LISTED IN INGREDS SECTION BELOW (ING 9)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
    IMPERMEABLE APRON CONSTRUCTED OF NITRILE, NEOPRENE, OR LATEX.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
    SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC: AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H2O
    USED, FOG NOZ ARE PREFERABLE. HAZ DECOMP PROD: INCL: CO,
    FOAMALDEHYDE. HLTH HAZ: TITANIUM DIOXIDE DUST IN LONG-TERM STUDY
    DEVELOPED  LUNG TUMORS. STUDIES W/HUMANS INVOLVED IN MFR OF PIGMENT
    INDICATE NO INCR RISK OF CANCER FROM EXPOS. POTENTIAL (ING 6)

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.2
Vapor Density:HVR/AIR
Spec Gravity:1.26
Evaporation Rate & Reference:33 (BUOAC=100)
Solubility in Water:52.9%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACT OF CHEM FAMILY & ANY
    SOLV LISTED IN INGREDS SECTION.
Percent Volatiles by Volume:84.80

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
    HEATED. WELDING, BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
    PRDCE FUMES (SUPP DATA

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
    WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRON CONTROL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
    THROUGH AN APPROVED WASTE MA NAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.